The most recent career openings.
• Lead implementation of site specific standards and guidelines.
• Promote safe culture among employees by ensuring corrective measures are taken.
• Perform frequent site safety audits to identify all non-compliance equipment and processes at the site.
• Assist in carrying out risk assessment for the company activities and recommend any changes that may be necessary.
• Work with the Operations team to implement solutions to eliminate exposure to these risks and prevent injury.
• Monitor the company’s operations, processes and procedures to ensure that they comply with health and safety regulations.
• Attend to any incidents and occupational injury cases on site
• Guide and assist senior managers on incident investigations
• Ensure the PPE inventory at the site and coordinate with procurement for order placement.
• Ensure basic firefighting training and first aid training completion.
• Attend required professional training for development and internal safety meetings
• Preparing risk assessments and emergency response plans.
Job Type: Full-time
Salary: AED 1,500.00 - AED 1,750.00 per month + Accommodation
Education / Certification:
Any Bachelors Degree with Nebosh certificate
Experience:
- 3 years minimum experience in a similar Health & Safety role
- Experience in a Construction Industry
- Good communication skills
- Works well within a team environment
Send your CV to hr.dubai@winstargroup.org | careers@winstargroup.org
• Responsible for verifying that all structures and associated assets are constructed in accordance with the approved construction drawings, inspection and test plans, and approved method statements.
• Knowledge of relevant survey procedures, construction techniques, codes, and standards.
• Perform land/field surveys and geodetic calculations.
• Complete the surveying requirements on schedule and within man-hours.
• Fully conversant with current survey technology and survey equipment.
• Check setting out and levels. Check service locations and ensure their protection.
• Prepare sketches to support the fieldwork. Maintain all the survey information (field books, sketches, and calculations).
• Assist the concerned Engineer in verification and checking of shop drawings
• Verification & routine checks of control points and benchmarks
• Verification of setting out of works
• Recording of initial and final levels of works
• Verification of earthwork cross-sections
• Take measurements of works inspected.
• Assist in the preparation of ‘as-built’ drawings. Review of ‘as-built’ record drawings.
• Perform other responsibilities associated with this position as may be appropriate.
• Interface with clients and contractors to determine and verify project survey requirements.
• Working in AutoCAD 2D/3D
• Ability to communicate effectively in English, Effective written and verbal communication skills.
• Analytical and problem-solving skills.
• Ability to work independently and as part of a team.
Job Type: Full-time
Salary: SAR 4,000.00 - SAR 4,500.00 per month
Education:
• Diploma/Associate Degree in Land Surveying or equivalent.
• Minimum 03-04 years of experience in road works and infrastructure projects.
• Good Knowledge and experience in using survey Instruments such as total station, Level machine, and theodolite.
• Proficient knowledge of software such as Microsoft Office, and AutoCAD is mandatory.
Experience:Minimum of 5 years (Preferred)
Send your CV to saleem@capsco.org | careers@winstargroup.org
• Relay and control engineering up to 400kV.
• Relay and control panel and schematics design, internal arrangement and wiring schedules.
• Panel interface engineering and preparation of control cable schedules.
• CAD electrical software (AutoCAD, Elecdes, Ebase) and preparation of panel production documents.
• Panel material ordering.
• Familiarity with protection relays (GE, Siemens and ABB) and their applications
Job Type: Full-time
Salary: QAR. 3,500.00 – QAR. 4,000.00 per month
Education:BACHELORS IN ELECTRICAL ENGINEERING (Preferred)
Experience:Minimum of 5 years (Preferred)
Send your CV to hr.qatar@winstargroup.org | careers@winstargroup.org
We are hiring a MEP contractor for a job in hand project, who has shop drawing approval in abudhabi .
Send your CV to civildivision@winstargroup.org
Carrying out the configuration and testing of all protection relays like generators, transformers, line, cables, motors, feeders etc.
Must be able to understand the relay coordination study and verify the report before uploading the settings and configuration in relays.
Functional checks of the relays and the complete schemes including end to end tests, unit protection schemes etc
Configuration of SCMS of GE, ABB, SIEMENS, SEL etc and must be able to establish complete communication link within the SS and with the control centers.
Must be able to carry out the retrofit of the protection system of the substations/ power plants.
Job Type: Full-time
Salary: AED/ SAR. 5000.00 per month
Education / Certification:
• FIRST class Graduate Electrical engineer.
• Must have the degree certificate attested for UAE / KSA.
• Must pass the utility/ municipality exam from where visa is issued.
Experience:
• Minimum of 5 years as Protection engineer is needed.
• Must have completed more than 20 substation projects.
• Must have completed a minimum of 5 retrofit projects.
Send your CV to careers@winstargroup.org
Carrying out the testing of switchgear components, power transformers, generators, cables, busducts, motors, GIS etc.
Must be able to test the backup protection relays along with configuration.
Must be able to do all the operational and Functional checks of the electrical system and must be able to carry stability and sensitivity tests for the complete system.
Must be able to independently carry out retrofit and maintenance testing of the electrical system.
Job Type: Full-time
Salary: AED/ SAR. 5000.00 per month
Education / Certification:
• FIRST class Graduate Electrical engineer.
• Must have the degree certificate attested for UAE / KSA.
• Must pass the utility/ municipality exam from where visa is issued.
Experience:
• A minimum of 7 years as substation testing engineer is needed.
• Must have completed more than 12 substation projects up to 400kV.
• Must have completed a minimum of 3 retrofit projects.
Send your CV to careers@winstargroup.org
Do the Bus bar fabrication (Cutting, Drilling/punching, Bending, cleaning/Grinding etc.) according to drawing provided
Inspect product quality to ensure conformance to approved drawings.
Operate machines such as cutting, punching, and bending machines to cut, punch and bend bus bars according to approved drawings.
Job Type: Full-time
Salary: QAR. 1,500.00 – QAR. 2,000.00 per month
Education:Diploma (Preferred), Can also be an ITI holder.
Experience:Working in LV panel builders with a minimum of 5 years (Preferred)
Send your CV to hr.qatar@winstargroup.org | careers@winstargroup.org
Able to read Panel drawings.
Independently do control and protection panel wiring and testing.
Panel wiring / Crimping and Termination as per the Panel drawing.
Arrangements of switchgear materials as per the Panel GA drawing and BOM.
Installation of Electricals components in control panel and Labeling/Ferruling.
Glanding and Termination of Field cables.
Control Panel continuity testing.
Job Type: Full-time
Salary: AED/ SAR. 1,500.00 – AED/ SAR. 2,000.00 per month
Education:Diploma (Preferred), Can also be an ITI holder.
Experience:Working in panel integrators with a minimum of 5 years (Preferred)
Send your CV to
careers@winstargroup.org
Control Panels Equipment:LV circuit Breakers,LV transformers and Power supplies, Contactors, VFD's(Inverters), and other electronics
Install New Electrical Systems : installing new or refurbished equipment for manufacturing or production plants.
He shall run tests to ensure that new machinery is ready to be implemented and work out any issues before the equipment is used on a daily basis.
Troubleshoot Problems with Electrical Equipment : When equipment on a factory floor runs into problems,
He shall troubleshoot problems with various types of equipment and understand why equipment is not working properly.
Repair and Maintain Existing Equipment : Once a problem has been identified, He shall use tools and replacement parts to make repairs to production and manufacturing machines.
Job Type: Full-time, Permanent
Salary: Up to AED/SAR. 2,500.00 per month
Education:Diploma (Preferred), Can also be an ITI holder.
Experience:working in refurbishment and repairs: 5 years (Preferred)
Send your CV to careers@winstargroup.org
Minimum 2 - 3 years experience.
Strong in Keil C / C Programming and should lead a team of Embedded software developers.
Willing to work in Self learning - R & D environment.
Should handle embedded programming along with knowledge of Hardware with various IC's Including Silergy, Atmel, PIC, Silergy, Power line Communication IC’s, Teridian, Maxim, and few other exclusive IC's.
Should be in a position to develop firmware right from day 1.
Should be in a position to drive a team and be result oriented.
Send your CV to careers@winstargroup.org
Bachelor's degree in Electrical or equivalent Engineering stream.
Valid UAE Driving License - Minimum two years of experience / Knowledge about UAE market.
Transferable Visa/NOC from UAE Employer (if applicable).
Experience in handling Power products – ELV/HV.
Experience in dealing with utilities (Transmission & Distribution) and principals & Associates .
Product knowledge of cable management systems, Busbars, Cables, Transformers, Energy meters, Lighting etc.
Good communication skills in English and Arabic.
Send your CV to careers@winstargroup.org
ITI/Diploma Engineering.
Minimum 2 years of experience as Electrician.
Should have worked in Installation and Erection of Panels.
Have experience in Cable Tray work, Wiring, Cable Laying, Earthing .
Responsible for wiring of the panels, modification of the protection panels and must be able to work on shift basis as and when required.
Effective Technical & Problem-solving skills.
Preferred Nationality-Pakistani.
Speaking in Hindi, English, Arabic is added advantage.
Send your CV to careers@winstargroup.org
Skilled technician having minimum 5 years of experience in Jointing and termination of LV, HV, (11KV – 33KV) cables in power distribution sector.
Distribution cable work is conducted in accordance with Industry Best Practice, legislation and company procedures.
Should be experienced in plug in and heat shrinkable type joints and terminations up to 33KV.
Advance technics in LV,HV cable jointing, termination, knowledge of safety practices.
Speaking in Hindi, English is added advantage.
Send your CV to careers@winstargroup.org
Years of Experience – 3 years.
Nationality preference : Any country.
Qualification – 10th pass or ITI.
Accommodation, transportation by company. Once in 2 years air fare allowance & 60 days paid leave.
Should have knowledge & experience on cable glanding & termination.
Should have knowledge & experience on panel erection.
Capable to work under pressure and extra hours as & when required
Should have knowledge on substation equipment’s such as transformers, switchgear panels, ACBs, VCBs.
Should have knowledge & experience on wiring modifications in pane.
Able to converse in English/Hindi/Tamil.
Send your CV to hr.qatar@winstargroup.org | Whatsapp : +97477664763 | careers@winstargroup.org
Diploma in Fire and Saftey Engineering.
Minimum 5 years work experience in Electrical Sub Station.
Must have NEBOSH/IOSH/OHSAS Certificate.
Need to have SEC approval.
Exceptional interpersonal skills.
Good verbal communication.
Send your CV to careers@winstargroup.org
Diploma in Engineering.
Minimum 5 years work experience in Electrical Sub Station.
The SAS Engineer will be responsible for commissioning transmission and distribution substations, new construction, extensions, retrofits & modifications ensuring all are installed, functional and energized correctly.
Will be responsible for the validation of customer system delivery to ensure no errors are incurred or introduced in the design package or installation of the solution offered by Hitachi ABB Power Grid.
The individual must be able to read engineering drawings and specifications to understand the purpose of the solution proposed.
Provides technical support for installation, execution testing and commissioning activities. Prepare documentation within one’s scope of deliverables. (Drawings, test plans, config files).
Exceptional interpersonal skills.
Send your CV to careers@winstargroup.org
UAE
KSA
IND
QA
BH